RAID 4-Bay Manual de usuario descargar pdf (Pagina 14)

4-2-2 The HDD Power setting.

The HDD Power setting DIP S/W on the rear side can set the power connection of each individual HDD

installed in CR-H458, the HDD Power setting provides excellent protection the HDD which is not working.

Each DIP switch controls each of 4 HDD trays, the order of dip switch and HDD are as below.

Attention

1. “The number of HDD which show on a PC” is combination number when implemented 4X

HDDs to this device.

2. When you use a combine mode, it is required to initialize the virtual disk volume. Please be

careful because it is erased entirely.

3. It is impossible to read internal data of the HDD which is working in combine mode change to

normal mode or change the installation position of HDD.

4. Before you change the setting mode, make sure that you have backup the data of the HDD

which is working at any change of mode. It is necessary to initialization the new disk volume

(partition setting and Format). Please backup the data of HDD before you change mode.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

Sin comentarios

RAID 4-Bay Manual de usuario Pagina 14